RF Wireless Remote Control universal remote control code grabber Radio Switch Transmitter Receiver DC12V 4 CH
This DC12V 4 channel learning code wireless remote control operates in the 315MHz frequency. Just press slightly the button on the remote, you can control universal DC/AC electrical devices. It can be mainly used to control many kinds of lights with voltage of DC0~250V; or motor open/close, such as motor of pump.
· Wireless control, easy to install
· Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with DC0~250V
· You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
· This switch can learn different coding remote controls(such as 2262,1527,2240 ect.)
· One/several transmitters can control one/several receivers simultaneously.
· If you use two or more receivers in the same place, you can set them with different codes. If you use multi-button transmitter, you can control the controller with different buttons, it won’t affect each other.
· Transmitting Frequency: 315MHz
· The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.
|Max. Voltage ||DC12V|
|Coding type||Learning Code|
|Receive Frequency||315MHz/433.92MHz ±150KHz|
|Output Mode||Contact output(AC and DC)|
|Working Temperature ||-10 to +60 centigrade|
|Working Current ||12mA|
|Transmitter Frequency ||315MHz/433.92MHz ±150KHz|
|Encoding Type||Fixed Code,Learning Code|
|Encoding Way |
Fixed Code by soldering
Learning code by learning
· Garage door control
· Access control system
· Home/Mall Automation systems such door/window/curtain control,lights control ect.
· Kinds of motor control system