1x LED Digital Wattmeter Voltmeter Ammeter Kilowatthourmeter Power factor panel module

1x LED Digital Wattmeter Voltmeter Ammeter Kilowatthourmeter Power factor panel module

View More

20,70

In stock (can be backordered)

QuantitàPrezzo Unitario
12 - 49 18,63
50 - 99 16,56
100 + 14,49

Product Description

1x LED Digital Wattmeter Voltmeter Ammeter Kilowatthourmeter Power factor panel module

DL69-2047 type digital multifunction measuring instruments

                user’s Guide

D69-2047 type digital multi-function table are displayed simultaneously measured AC voltage, AC current ,, active power, energy (electrical degrees), power factor and other electrical parameters on the instrument.

Main Specifications

1. Accuracy: 1% ± 2 words

2. Display: voltage and power factor 0.32 inches display 4 red LED digital current display with 4-digit, red LED digital tube 0.32 inches.

                Active power, energy (electrical degrees) display uses 5, green LED digital tube 0.32 inches

3. Measurement Range: AC voltage: AC80.0-300.0V, (or AC200.0-450.0V, according to user need to make when ordering)

                        AC current: AC0.00-100.0A, when measured current is less than 100A current display resolution is 0.01A, when measuring currents greater than 100A current display resolution is 0.1A, automatic conversion range.

                        🙁 Active measuring voltage AC80.0-300.0V) 0.0-30000W (AC200.0-450.0V: 45000W)

                        Energy (electrical degrees): 0.000-99999kwh, automatic decimal conversion

                        Power factor: 1.000-0.000

4. Measurement speed: approximately 2 times per second

5. Dimensions: 79 × 43 × 48mm

 

 

Use and wiring methods

1. In accordance with the drawings of the wiring diagram, will end with the current transformer secondary instrument, (green wire) on the blue terminals connected to the instrument, the measurement circuit wires through the middle hole of the current transformer .

2. Place the leads connected to the instrument voltage measurement green terminals. Then pass on the measured voltage. Start reading the measurement results.

3. After power measurement instrument displays display functions are voltage (V), current (A), active power (W). When press the left button on the instrument panel

  (SAM CK), active power meter (W), the display changes to show the power (electrical degrees) (kwh), then click the button changes to display the power factor (cos?). Press the button again to change back to the display active (W). Pressing (SAM CK) digital tube display function buttons shown in green cycle shown in the following diagram:

4. When the need for electrical energy (electrical degrees) measured from scratch measurement, press the button (SAM CK) function to convert the measurement to the electrical energy (electrical degrees) measurement function is displayed above the 5 meter green LED digital display function indicator to the right of kwh position, then press and hold down (SAM CK) button for 5 seconds, power (electrical degrees) shows all green five digital display zero, release the button (SAM CK) energy (electrical degrees) metering display from scratch.

5. energy (electrical degrees) showed a power failure auto-save feature data, that is, when the measured voltage is disconnected or a power outage, the meter will automatically save the current energy (electrical degrees) data count when reconnecting the power measuring instruments will be saved in the original data continues to accumulate.

Facebooktwitterredditpinterestlinkedinmail

There are no reviews yet.

Be the first to review “1x LED Digital Wattmeter Voltmeter Ammeter Kilowatthourmeter Power factor panel module”