SRD-9VDC-SL-C Songle Relè T73-9V 5pins
SRD-12VDC-SL-C Songle Relè T73-12V 5pins
1 canale Relè Lighting Wireless Controllo Remoto Pulsante Controllo...
5 Pezzi 2*5 2.54mm Long Pin Header Femmina Connettore Plug
Nema22 57 Stepper 57Hs13/57BYGH76 3A 1.3Nm torque shaft 6.35/8mm
50 Pezzi Resistenza 0.36 ohm 1/4w 1/4 w 5%
20 Pezzi Led BIANCO - WHITE 5 mm standard super bright LED...
20 Pezzi Led BLU - BLUE 5 mm standard super bright LED light-emitting...
20 Pezzi Led ROSSO - RED 5 mm standard super bright LED light-emitting...
20 Pezzi Led VERDE - Green 5 mm standard super bright LED light-emitting...
Convertitore regolabile DC-DC step down LM2596S alimentatore 5V 12V 2A...
3 Pezzi LED RGB MULTICOLOR 5mm ANODO COMUNE 8000mcd
NanoPi-M2 4418 quad-core A9 open...
Attenzione: Ultimi articoli in magazzino!
Disponibile dal: 25/10/2016
NanoPi-M2 4418 quad-core A9 open source development board boxes sent Gigabit Ethernet 1GB memory AXP228
The NanoPi M2 is another Samsung 4418 based ARM board released by FriendlyARM after the NanoPi 2 and NanoPi 2 Fire. It is only two thirds the size of the Raspberry Pi. It is open source. It works with Ubuntu Core, Ubuntu Mate, Debian, Android 5.1 and etc.
Compared to the Raspberry Pi 2 the NanoPi M2 uses the Samsung Cortex-A9 S5P4418 Soc. It integrates Gbps Ethernet, AXP228 PMU which supports software power-on/off and wake up functions. It can be powered via the MicroUSB port
In such a small board it still integrates rich interfaces and ports. Besides the popular HDMI, 3.5mm audio jack, onboard microphone, four USB hosts and Gbit Ethernet it has a Raspberry Pi compatible 40 pin GPIO pin header and various video interfaces such as a DVP camera interface, an LCD interface which supports I2C capacitive LCD and etc. In addition, for user’s convenience it has a serial debug port for debugging and development.
CPU: S5P4418, 400Mhz~1.4GHz
PMU Power Management Unit: AXP228, support software power-off, sleep and wakeup functions
DDR3 RAM: 32bit 1GB DDR3
MicroSD Slot x1
Connectivity: Gbps Ethernet port(RTL8211E)
Audio: 3.5mm audio jack/Via HDMI
Microphone: 1 x onboard Microphone
USB Host: 4 x USB 2.0 Host, two are standard type A ports and the other two are 2.54mm pitch pin headers
Micro USB: 1 x USB 2.0 Client
LCD Interface: 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8)
HDMI: HDMI 1.4A, Type-A, 1080P60
DVP Camera Interface: 0.5mm pitch FPC socket. It includes ITU-R BT 601/656 8-bit, I2C and IO
GPIO1: 2.54mm pitch 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, PWM, IO etc
Debug Serial Port: 4Pin 2.54mm pitch pin header
User Key: 1 x Power , 1 x Reset
LED: 1 x Power LED, 1 x System LED
RTC: RTC Pins
Power: DC 5V/2A
PCB Dimension(mm): 64 x 56, Six Layer
OS/Software: u-boot, Android5.1, Debian Jessie 8